Peugeot 406

since 1996 release

Repair and operation of the car

www.planescort.com

11.6. Lower lever of a forward suspension bracket

Removal

PERFORMANCE ORDER

1. Lift a forward part of the car and record on supports. Remove the corresponding forward wheel.
2. Unscrew a nut and take the lower spherical hinge from the lower lever.
	3. Unscrew a hinged bolt of fastening (it is specified by an arrow) a forward part of the lower lever.
	4. Unscrew 2 bolts (are specified by shooters) fastenings of the plug of installation of a back part of the lower lever to the lower frame.
5. Take the lower lever from under the car.

Repair

Replacement of the forward plug of a point of turn and back suspension bracket of installation demands use of a hydraulic press, a stripper for bearings and a frame. Therefore this work should be performed at the station.

PERFORMANCE ORDER

1. Clear the lower lever of dirt and an anticorrosive covering.

2. Check the lever for existence of cracks, distortions of a form or any other defects.

Installation

PERFORMANCE ORDER

1. Install the lower lever into place, insert a forward hinged bolt and screw on it a nut, without clamping finally.

2. Install the back plug of a point of turn of the lever and fix it by bolts, having tightened them the required moment.

3. Install the lower spherical hinge of a rotary fist in the lower lever. Tighten the spherical hinge a new nut, having tightened it the required moment.

4. Establish a wheel and lower the car. Shake the car that all elements of a suspension bracket fell into place. Finally tighten a nut of fastening of a forward hinged bolt of the lower lever the required moment.

5. If necessary check the angles of installation of forward wheels.