Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
- 11. Suspension bracket and steering
   11.1. Technical data
   11.2. Rotary fists
   11.3. Replacement of forward hug bearings
   11.4. The lobby is resistant
   11.5. Repair of a forward rack
   11.6. Lower lever of a forward suspension bracket
   11.7. Lower spherical hinge of a forward suspension bracket
   11.8. Stabilizer of cross stability of a forward suspension bracket
   11.9. Coulisse of the stabilizer of cross stability of a forward suspension bracket
   11:10. Lower frame of a forward suspension bracket
   11:11. Nave of a back wheel
   11:12. Replacement of bearings of a back nave
   11:13. Shock-absorber of a back suspension bracket
   11:14. Cylindrical spring of a back suspension bracket
   11:15. Pin of a nave of a back suspension bracket
   11:16. Lower lever of a back suspension bracket
   11:17. Top lever of a back suspension bracket
   11:18. The directing lever of a back suspension bracket
   11:19. Draft of a back suspension bracket
   11:20. Stabilizer of cross stability of a back suspension bracket
   11:21. Coulisse of the stabilizer of cross stability of a back suspension bracket
   11:22. Steering wheel
   11:23. Steering column
   11:24. Intermediate shaft of a steering column
   11:25. Ignition lock
   11:26. Steering mechanism
   11:27. Replacement of protective covers of the steering mechanism
   11:28. Removal of air from system of steering with the amplifier
   11:29. Pump of the amplifier of steering
   11:30. Spherical hinge of steering draft
   11:31. Steering draft
   11:32. Angles of installation of wheels
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions




2438a55b

11:22. Steering wheel

GENERAL INFORMATION

Prevention

On the cars equipped with a safety cushion from the driver there is a word AIRBAG printed on a block of a steering wheel.


MODELS WITHOUT SAFETY CUSHION

Removal

PERFORMANCE ORDER
1. Establish forward wheels for the movement directly forward.
2. Using the lever, remove a decorative slip from the central part of a steering wheel.
3. Unscrew a bolt of fastening of a steering wheel.
4. Apply on a steering shaft and a steering wheel of a tag of combination then remove a steering wheel from grooves of a steering shaft.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.
2. Make sure that the ledge of the automatic switch of turns is in the central situation.
3. Combine the tags put at removal and tighten a bolt the required moment.

MODELS WITH THE SAFETY CUSHION

Removal

PERFORMANCE ORDER
1. Remove a safety cushion.
2. Establish forward wheels for the movement directly forward.
3. Unscrew a bolt of fastening of a steering wheel and note the mutual provision of a steering shaft and steering wheel.
4. Remove the electric socket (it is specified by an arrow) safety cushions from brackets of fastening and remove a steering wheel from grooves of a steering shaft.

Installation

Installation is made in the sequence, the return to removal.