Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
- 11. Suspension bracket and steering
   11.1. Technical data
   11.2. Rotary fists
   11.3. Replacement of forward hug bearings
   11.4. The lobby is resistant
   11.5. Repair of a forward rack
   11.6. Lower lever of a forward suspension bracket
   11.7. Lower spherical hinge of a forward suspension bracket
   11.8. Stabilizer of cross stability of a forward suspension bracket
   11.9. Coulisse of the stabilizer of cross stability of a forward suspension bracket
   11:10. Lower frame of a forward suspension bracket
   11:11. Nave of a back wheel
   11:12. Replacement of bearings of a back nave
   11:13. Shock-absorber of a back suspension bracket
   11:14. Cylindrical spring of a back suspension bracket
   11:15. Pin of a nave of a back suspension bracket
   11:16. Lower lever of a back suspension bracket
   11:17. Top lever of a back suspension bracket
   11:18. The directing lever of a back suspension bracket
   11:19. Draft of a back suspension bracket
   11:20. Stabilizer of cross stability of a back suspension bracket
   11:21. Coulisse of the stabilizer of cross stability of a back suspension bracket
   11:22. Steering wheel
   11:23. Steering column
   11:24. Intermediate shaft of a steering column
   11:25. Ignition lock
   11:26. Steering mechanism
   11:27. Replacement of protective covers of the steering mechanism
   11:28. Removal of air from system of steering with the amplifier
   11:29. Pump of the amplifier of steering
   11:30. Spherical hinge of steering draft
   11:31. Steering draft
   11:32. Angles of installation of wheels
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions




2438a55b

11:30. Spherical hinge of steering draft

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and record on supports. Remove the corresponding forward wheel.
2. Using a chertilka, note position of the spherical hinge on steering draft.
3. Record steering draft and unscrew a lock-nut of the spherical hinge on a quarter of a turn. Do not move a lock-nut from this situation as it will serve as a reference point at installation of the new spherical hinge.
4. Unscrew a nut of fastening of the spherical hinge to a rotary fist.
5. Remove the spherical hinge from a rotary fist.
6. Screw together the spherical hinge from steering draft, having counted the exact speed of the spherical hinge.
7. Count number of full rounds of a carving between the end of the spherical hinge and a lock-nut. If it is necessary to install the new spherical hinge, screw together a lock-nut from the old hinge.
8. Carefully clear the spherical hinge and its carving. If the hinge has a side play or its protective cover is damaged, it needs to be replaced.

Installation

PERFORMANCE ORDER
1. If the new spherical hinge of steering draft is installed, screw on it a lock-nut on that quantity of rounds which was on the old spherical hinge at removal.
2. Screw up the spherical hinge in steering draft on the same speed, as at removal. At the same time, the lock-nut on the hinge has to be established on a quarter of a turn of steering draft.
3. Establish a pin of the spherical hinge in a rotary fist, fix by a new nut and tighten it the required moment.
4. Establish a wheel and lower the car.
5. Check and, if necessary, adjust the angles of installation of forward wheels. After that tighten a lock-nut of the spherical hinge of steering draft.