Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
- 11. Suspension bracket and steering
   11.1. Technical data
   11.2. Rotary fists
   11.3. Replacement of forward hug bearings
   11.4. The lobby is resistant
   11.5. Repair of a forward rack
   11.6. Lower lever of a forward suspension bracket
   11.7. Lower spherical hinge of a forward suspension bracket
   11.8. Stabilizer of cross stability of a forward suspension bracket
   11.9. Coulisse of the stabilizer of cross stability of a forward suspension bracket
   11:10. Lower frame of a forward suspension bracket
   11:11. Nave of a back wheel
   11:12. Replacement of bearings of a back nave
   11:13. Shock-absorber of a back suspension bracket
   11:14. Cylindrical spring of a back suspension bracket
   11:15. Pin of a nave of a back suspension bracket
   11:16. Lower lever of a back suspension bracket
   11:17. Top lever of a back suspension bracket
   11:18. The directing lever of a back suspension bracket
   11:19. Draft of a back suspension bracket
   11:20. Stabilizer of cross stability of a back suspension bracket
   11:21. Coulisse of the stabilizer of cross stability of a back suspension bracket
   11:22. Steering wheel
   11:23. Steering column
   11:24. Intermediate shaft of a steering column
   11:25. Ignition lock
   11:26. Steering mechanism
   11:27. Replacement of protective covers of the steering mechanism
   11:28. Removal of air from system of steering with the amplifier
   11:29. Pump of the amplifier of steering
   11:30. Spherical hinge of steering draft
   11:31. Steering draft
   11:32. Angles of installation of wheels
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions




2438a55b

11:29. Pump of the amplifier of steering

Removal

PERFORMANCE ORDER
1. Weaken a tension of a driving belt and take off a belt from a pump pulley. The pump of the amplifier of steering is located above or below the generator of alternating current, depending on engine type. If the pump is located under the generator, access to it is most convenient from below the car.
2. Using G-shaped clips, press the giving and returnable hoses about a nutritious tank.
3. Unscrew a nut and remove a bracket of fastening of a hose in a back part of the pump.
4. Weaken a collar and remove the giving hose from the pump. Unscrew a nut and disconnect the bringing pipe.
5. Unscrew bolts of fastening of the pump and remove it from an arm.
6. If the pump has defects, it needs to be replaced assembled.

Installation

PERFORMANCE ORDER
1. Install the pump on an arm and fix by bolts.
2. Connect the bringing pipe to the pump and screw a connecting nut. Establish the bringing pipe to the pump and fix by a collar. Remove clips from hoses.
3. Establish a bracket of fastening of a hose to a back part of the pump.
4. Establish a driving belt on a pulley of the pump and adjust a tension.
5. Remove air from system.