Виды ставок система смотрите на http://winline.ru.

Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
- 12. Body
   12.1. General information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. Front bumper
   12.7. Rear bumper
   12.8. Cowl
   12.9. Cowl lock cable
   12:10. Cowl lock
   12:11. Doors
   12:12. Door upholstery
   12:13. Lock and handles of opening of a door
   12:14. Glasses of doors
   12:15. Trunk lid
   12:16. Luggage carrier lock
   12:17. Back door
   12:18. Lock of a back door
   12:19. System of the central blocking
   12:20. Power windows
   12:21. External rear-view mirrors
   12:22. Front and back flew down
   12:23. Hatch
   12:24. Slips and emblems
   12:25. Seats
   12:26. Mechanism of a tension of a seat belt of a front seat
   12:27. Seat belts
   12:28. Finishing of salon
   12:29. Central console
   12:30. Dashboard
+ 13. Electric equipment
+ 14. Main malfunctions





12.8. Cowl

Removal

PERFORMANCE ORDER
1. Open a cowl and place rags under cowl corners to exclude damages of a body at removal of a cowl.
2. Disconnect a windscreen washer hose on the right side of a cowl.
3. For the correct installation of a cowl into place a soft pencil note the provision of nuts on a cowl.
4. Supporting a cowl, remove brackets of fastening and separate support racks from a cowl.
5. Unscrew the left and right nuts of fastening of hinges to a cowl and remove a cowl.

Installation

PERFORMANCE ORDER
Establish a cowl into place and fix by nuts, tightening them by hand. Level a cowl according to earlier made tags and put the clamps finally. Adjust the provision of a cowl so that at the closed cowl the gap on its perimeter was identical from all directions. For adjustment of a forward part of a cowl on height it is necessary to screw in or unscrew the rubber pillows located on a forward part of a motor compartment