Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
- 12. Body
   12.1. General information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. Front bumper
   12.7. Rear bumper
   12.8. Cowl
   12.9. Cowl lock cable
   12:10. Cowl lock
   12:11. Doors
   12:12. Door upholstery
   12:13. Lock and handles of opening of a door
   12:14. Glasses of doors
   12:15. Trunk lid
   12:16. Luggage carrier lock
   12:17. Back door
   12:18. Lock of a back door
   12:19. System of the central blocking
   12:20. Power windows
   12:21. External rear-view mirrors
   12:22. Front and back flew down
   12:23. Hatch
   12:24. Slips and emblems
   12:25. Seats
   12:26. Mechanism of a tension of a seat belt of a front seat
   12:27. Seat belts
   12:28. Finishing of salon
   12:29. Central console
   12:30. Dashboard
+ 13. Electric equipment
+ 14. Main malfunctions










12:11. Doors

Removal

PERFORMANCE ORDER
1. Remove the negative plug from the accumulator.
Forward door
2. If at doors there are any electric elements, remove an upholstery of a door and a protective film.
3. Disconnect sockets from electric elements and brackets of fastening. Remove the rubber condensing ring from a first line of a door. Take an electrical wiring from a door.
4. A pencil or a felt-tip pen note position of each hinge of a door concerning a door for simplification of its further installation and adjustment.
5. Unscrew bolts of fastening of an emphasis of a door to a rack (a photo at the left) and remove a rubber cover (a photo on the right).
6. Supporting a door, unscrew bolts of fastening of the hinge and remove a door.
7. If it is necessary to replace hinges of opening of a door, a marker note their situation on a door, unscrew bolts and remove hinges.
8. Install new hinges according to earlier made tags and screw them bolts.
Back door
9. Open a forward door for access to the socket of an electrical wiring of a back door. Turn a ring of blocking of the socket counterclockwise and remove the socket from a door.
10. A pencil note position of each hinge concerning a door. Unscrew bolts (are specified by shooters) fastenings of an emphasis of a door to a rack and remove a rubber protective cover. Supporting a door, unscrew bolts of fastening of the hinge and remove a door.

Installation

PERFORMANCE ORDER
Forward door
1. Establish a door into place and fix hinges by bolts. Combine hinges with earlier made tags and tighten bolts the required moment.
2. Establish a rubber protective cover on an emphasis of a door and screw an emphasis on a rack.
3. Connect electric sockets. Establish a protective film and an upholstery on a door.
4. Check installation of a door and, if necessary, adjust.
Back door
5. Establish a door and fix hinges by bolts. Combine hinges with earlier made tags and tighten bolts the required moment. Establish a rubber cover on an emphasis of a door and screw an emphasis on a rack. Connect the electric socket to a door and record its ring of blocking.

Adjustment

PERFORMANCE ORDER
Close a door and check its alignment with body panels. If it is necessary to make small adjustment, weaken bolts of fastening of hinges. Moving hinges on a rack, adjust the provision of a door and tighten bolts of fastening of hinges.