Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
- 12. Body
   12.1. General information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. Front bumper
   12.7. Rear bumper
   12.8. Cowl
   12.9. Cowl lock cable
   12:10. Cowl lock
   12:11. Doors
   12:12. Door upholstery
   12:13. Lock and handles of opening of a door
   12:14. Glasses of doors
   12:15. Trunk lid
   12:16. Luggage carrier lock
   12:17. Back door
   12:18. Lock of a back door
   12:19. System of the central blocking
   12:20. Power windows
   12:21. External rear-view mirrors
   12:22. Front and back flew down
   12:23. Hatch
   12:24. Slips and emblems
   12:25. Seats
   12:26. Mechanism of a tension of a seat belt of a front seat
   12:27. Seat belts
   12:28. Finishing of salon
   12:29. Central console
   12:30. Dashboard
+ 13. Electric equipment
+ 14. Main malfunctions




2438a55b

12:21. External rear-view mirrors

Removal and installation

PERFORMANCE ORDER
Rear-view mirror with manual adjustment
1. Remove a rubber protective cover from the handle of adjustment of a mirror and remove internal decorative finishing of a mirror from a door.
2. By means of the screw-driver take from cap doors. Unscrew screws and remove a mirror from a door.
Rear-view mirror with the electric drive
3. Remove decorative finishing of a mirror from the inside of a door.
4. By means of the screw-driver remove caps (are specified by shooters a photo at the left) from the inside of a door, unscrew screws (strelkm are specified a photo on the right) fastenings and remove a mirror from a door.
5. Disconnect electric sockets from a mirror.
Mirror glass

Prevention

Glass of a mirror is fixed in the holder of a mirror by conical connection. At removal of glass of a mirror it is very easy to break it therefore this work needs to be performed in gloves.


6. Reject a mirror against the stop up and insert a wide plastic or wooden plate between glass and the holder of a mirror. Take the lower part of a mirror from the holder.
7. Remove glass of a mirror and disconnect the electric socket (it is specified by an arrow) heating of a mirror.
Engine of management of the provision of a mirror
8. Remove mirror glass.
9. Unscrew fastening screws (are specified by shooters), remove the engine and disconnect from it the electric socket.
10. Installation is made in the sequence, the return to removal.