Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
- 12. Body
   12.1. General information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. Front bumper
   12.7. Rear bumper
   12.8. Cowl
   12.9. Cowl lock cable
   12:10. Cowl lock
   12:11. Doors
   12:12. Door upholstery
   12:13. Lock and handles of opening of a door
   12:14. Glasses of doors
   12:15. Trunk lid
   12:16. Luggage carrier lock
   12:17. Back door
   12:18. Lock of a back door
   12:19. System of the central blocking
   12:20. Power windows
   12:21. External rear-view mirrors
   12:22. Front and back flew down
   12:23. Hatch
   12:24. Slips and emblems
   12:25. Seats
   12:26. Mechanism of a tension of a seat belt of a front seat
   12:27. Seat belts
   12:28. Finishing of salon
   12:29. Central console
   12:30. Dashboard
+ 13. Electric equipment
+ 14. Main malfunctions




2438a55b

12:29. Central console

Removal and installation

PERFORMANCE ORDER
1. Shift front seats against the stop forward and unscrew screws of fastening of the central console from the left and right back parties.
2. Shift sitting lobbies against the stop back and remove the negative plug from the accumulator.
3. Open an ashtray cover, move it forward and take an ashtray from the central console.
4. Shift the ashtray case forward and take it from the central console.
5. Disconnect the electric socket from the ashtray case.
6. Through a window for installation of an ashtray unscrew screws, the fixing left and right wings to the central console.
7. Separate a forward part of the left and right wings of the central console and remove them.
8. On cars with the mechanical transmission remove a protective cover of the lever of gear shifting.
9. On cars with the automatic transmission remove the button from the top part of the lever of the choice of transfers.
10. On all models remove a decorative cover of the lever of the emergency brake from the top part of the central console.
11. In the presence remove armrests of front seats.
12. Unscrew 2 nuts (are specified by shooters) fastenings of a forward part of the central console to a floor.
13. Disconnect air supply tubes from a heater, raise a back part of the central console and switch-off electric sockets.
14. Disconnect the electric socket from the lighter (a photo at the left) and remove the central console (a photo on the right).
15. Installation is made in the sequence, the return to removal.