Peugeot 406

since 1996 release

Repair and operation of the car

Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
- 12. Body
   12.1. General information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. Front bumper
   12.7. Rear bumper
   12.8. Cowl
   12.9. Cowl lock cable
   12:10. Cowl lock
   12:11. Doors
   12:12. Door upholstery
   12:13. Lock and handles of opening of a door
   12:14. Glasses of doors
   12:15. Trunk lid
   12:16. Luggage carrier lock
   12:17. Back door
   12:18. Lock of a back door
   12:19. System of the central blocking
   12:20. Power windows
   12:21. External rear-view mirrors
   12:22. Front and back flew down
   12:23. Hatch
   12:24. Slips and emblems
   12:25. Seats
   12:26. Mechanism of a tension of a seat belt of a front seat
   12:27. Seat belts
   12:28. Finishing of salon
   12:29. Central console
   12:30. Dashboard
+ 13. Electric equipment
+ 14. Main malfunctions

12:12. Door upholstery



The upholstery of a door can have changes depending on the level of finishing of salon. Therefore process of removal of an upholstery can differ from stated.


1. Remove the negative plug from the accumulator.
Forward door
2. Remove a decorative overlay of a mirror from an internal part of a door.
3. On models with a manual window regulator remove the handle about axes and laying.
4. Remove the switch from an armrest of a door and the loudspeaker from a door.
5. Remove the internal handle of opening of the lock of a door and by means of the screw-driver remove a decorative frame of the handle.
6. By means of the screw-driver remove a cap from the lower back part of an upholstery of a door (a photo at the left) and unscrew the fastening screw (a photo on the right).
7. Remove an upholstery and unscrew the screw fixing a reverse side of an armrest to a door.
8. In the presence uncover an armrest pocket, unscrew the fastening screw (a photo at the left) and remove an armrest pocket (a photo on the right).
9. In the presence unscrew the screw of fastening of the block of switches on a door upholstery.
10. Check that all screws of fastening of an upholstery of a door are unscrewed then by means of the lever separate an upholstery from a door (a photo at the left) and, moving an upholstery up, remove it from a door (a photo on the right).
Back door
11. The upholstery of a back door is removed as well as in a forward door.
12. Remove a decorative cap of the screw of fastening of an upholstery of a back door.
13. Unscrew screws (are specified by shooters) fastenings of an upholstery of a back door.


Installation is made in the sequence, the return to removal. Check operation of all switches for doors.