Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
- 12. Body
   12.1. General information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. Front bumper
   12.7. Rear bumper
   12.8. Cowl
   12.9. Cowl lock cable
   12:10. Cowl lock
   12:11. Doors
   12:12. Door upholstery
   12:13. Lock and handles of opening of a door
   12:14. Glasses of doors
   12:15. Trunk lid
   12:16. Luggage carrier lock
   12:17. Back door
   12:18. Lock of a back door
   12:19. System of the central blocking
   12:20. Power windows
   12:21. External rear-view mirrors
   12:22. Front and back flew down
   12:23. Hatch
   12:24. Slips and emblems
   12:25. Seats
   12:26. Mechanism of a tension of a seat belt of a front seat
   12:27. Seat belts
   12:28. Finishing of salon
   12:29. Central console
   12:30. Dashboard
+ 13. Electric equipment
+ 14. Main malfunctions





12:27. Seat belts

Removal and installation

PERFORMANCE ORDER
Seat belt of a front seat
1. Remove the negative plug from the accumulator.
2. Remove the corresponding front seat.
3. Remove brackets of fastening and take finishing under the dashboard.
4. If work is performed from the driver, unscrew a bolt and move the lever of opening of a cowl aside.
5. In interior of the car unscrew screws (are specified by shooters) and remove a forward side decorative slip.
6. Unscrew the screw (it is specified by an arrow a photo at the left) and remove an internal decorative overlay of a threshold (a photo on the right).
7. Remove consolidation of forward and back doors from the central rack.
8. Remove internal finishing of the central rack. Removal needs to be begun with the top part of a rack.
9. Unscrew screws (are specified by shooters) fastenings of a forward part of a decorative overlay of a threshold of a back door for access to an inertial drum of a tension of a seat belt.
10. For full removal of a decorative overlay of a threshold of a back door it is necessary to remove a back seat.
11. Unscrew 2 screws and remove a seat belt guide from the central rack.
12. Unscrew a bolt of the top fastening of a seat belt and separate a belt from height regulator.
13. Unscrew a bolt (it is specified by an arrow) fastenings of an inertial drum of a seat belt and take a drum with a belt.
Seat belts of a back seat on models the sedan (Saloon)
14. Remove a pillow of a back seat and side pillows.
15. Unscrew a bolt of the lower fastening of a seat belt to a floor.
16. Take percussion caps (are specified by shooters) fastenings of a forward part of the back shelf to a body.
17. Being careful, remove (a photo at the left) and take (a photo on the right) decorative overlays for passing of a belt through the back shelf.
18. Remove back loudspeakers (columns).
19. Open a ware box in the center of the back shelf and unscrew a bolt of fastening of the shelf.
20. Raise a first line of the shelf and, shifting forward, take it from a nest.
21. Unscrew a bolt of fastening of an inertial drum of a seat belt and remove it.
Seat belt of a back seat on models of a komba (Estate)
22. Open a back door and remove side consolidation from the required party. Remove the top internal finishing from a back rack and uncover side ware office in a luggage carrier. Remove a covering of the luggage compartment.
23. Unscrew screws (are specified by shooters) fastenings of back finishing of the luggage compartment.
24. Remove back finishing of the luggage compartment (a photo at the left) and side back finishing of the luggage compartment (a photo on the right).
25. Uncover and unscrew the lower bolt of fastening of a seat belt.
26. Remove a decorative slip and unscrew a bolt of the top fastening of a belt from a rack, noting an arrangement of laying on the top fastening of a belt.
27. Unscrew a bolt of the top fastening of a seat belt.
28. At removal of washers and laying from a bolt of fastening of a belt it should be noted their relative positioning.
29. Remove a step washer from a bolt of the top fastening of a seat belt.
30. Remove consolidation of a side back door from a back rack (a photo at the left) and internal finishing of a side back rack (a photo on the right).
31. Using the screw-driver, remove a ventilation lattice from the lower part of back side glass.
32. Unscrew fastening screws (are specified by shooters a photo at the left) and remove a side decorative overlay of the luggage compartment (a photo on the right).
33. Unscrew bolts (a photo at the left) and remove an inertial drum of a seat belt.
34. Installation is made in the sequence, the return to removal.