Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
- 12. Body
   12.1. General information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. Front bumper
   12.7. Rear bumper
   12.8. Cowl
   12.9. Cowl lock cable
   12:10. Cowl lock
   12:11. Doors
   12:12. Door upholstery
   12:13. Lock and handles of opening of a door
   12:14. Glasses of doors
   12:15. Trunk lid
   12:16. Luggage carrier lock
   12:17. Back door
   12:18. Lock of a back door
   12:19. System of the central blocking
   12:20. Power windows
   12:21. External rear-view mirrors
   12:22. Front and back flew down
   12:23. Hatch
   12:24. Slips and emblems
   12:25. Seats
   12:26. Mechanism of a tension of a seat belt of a front seat
   12:27. Seat belts
   12:28. Finishing of salon
   12:29. Central console
   12:30. Dashboard
+ 13. Electric equipment
+ 14. Main malfunctions




2438a55b

12:17. Back door

Removal

PERFORMANCE ORDER
Back door
1. Remove the negative plug from the accumulator.
2. Remove consolidation of a back door for access to electric wires in a back door.
3. Disconnect electric sockets (are specified by shooters) a back door which are located in a forward part of the left back rack.
4. Remove the condensing ring and take a plait of wires from a body.
5. Disconnect the electric socket (1), unscrew the screw of fastening of the tire of grounding (2) to the right back rack.
6. Disconnect a washer hose, remove the condensing ring and take wires and a hose of a washer.
7. A pencil note position of each hinge on a back door.
8. Supporting a back door, remove brackets of fastening and disconnect racks of support of a back door.
9. Unscrew bolts (are specified by shooters) fastenings and remove a back door from the car.
10. If it is necessary to replace hinges of a back door, note a pencil their situation and remove the top finishing of a back door in salon.
11. Supporting a ceiling upholstery, unscrew nuts of fastening of hinges of a door and remove them. Install new hinges, having combined them with the tags made before removal the top part of finishing of a door.
Rack of support of a back door
12. Remove brackets of fastening and disconnect a rack of support of a back door from spherical hinges.

Installation

PERFORMANCE ORDER
Back door
1. Installation is made in the sequence of the return to removal. At the same time it is necessary to combine hinges with the tags put before removal of a door.
Rack of support of a back door
2. Installation is made in the sequence of the return to removal. Check that the rack is reliably fixed on spherical hinges by fastening brackets.