достопримечательности ялты с фото.

Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
- 12. Body
   12.1. General information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. Front bumper
   12.7. Rear bumper
   12.8. Cowl
   12.9. Cowl lock cable
   12:10. Cowl lock
   12:11. Doors
   12:12. Door upholstery
   12:13. Lock and handles of opening of a door
   12:14. Glasses of doors
   12:15. Trunk lid
   12:16. Luggage carrier lock
   12:17. Back door
   12:18. Lock of a back door
   12:19. System of the central blocking
   12:20. Power windows
   12:21. External rear-view mirrors
   12:22. Front and back flew down
   12:23. Hatch
   12:24. Slips and emblems
   12:25. Seats
   12:26. Mechanism of a tension of a seat belt of a front seat
   12:27. Seat belts
   12:28. Finishing of salon
   12:29. Central console
   12:30. Dashboard
+ 13. Electric equipment
+ 14. Main malfunctions





12:15. Trunk lid

Removal

PERFORMANCE ORDER
Trunk lid
1. Open a trunk lid and remove the negative plug from the accumulator.
2. Remove percussion caps of fastening of finishing of a trunk lid.
3. Remove finishing.
4. Remove fastening brackets from a protective cover of electric wires on a trunk lid.
5. Disconnect a sheeting of electric wires from the trunk lid hinge.
6. Disconnect electric sockets from electric knots in a trunk lid, noting their arrangement. Tie a cord to the ends of wires and take a plait of wires from a trunk lid. Untie a cord from electric wires, leaving it in a trunk lid.
7. A marker note position of hinges on a trunk lid. Unscrew bolts (are specified by shooters) fastenings of hinges and remove a trunk lid.
8. For unscrewing of hinges of a trunk lid it is necessary to remove the back shelf in interior of the car from a body and to unscrew a bolt of fastening of the hinge (it is specified by an arrow).
Rack of support of a trunk lid
9. Using the small screw-driver, remove brackets of fastening and disconnect spherical hinges of a rack from a body and a trunk lid.

Installation

PERFORMANCE ORDER
Trunk lid
1. Installation is made in the sequence, the return to removal. At the same time it is necessary to combine hinges of fastening of a trunk lid with earlier made tags.
2. Close a trunk lid and check uniformity of a gap on perimeter of a luggage carrier and if necessary make its adjustment, weakening bolts of fastening of hinges of a trunk lid. After adjustment tighten fastening bolts.