| 1. For improvement of access to the switch remove the case of the air filter and inlet channels. |
| 2. Install the selector lever in situation "N". |
| 3. Note position of the lever of the selector concerning the switch. |
| 4. By means of the lever remove a cable from the selector lever on the multipurpose switch. |
| 5. Track an electrical wiring from the switch to the socket and switch-off the socket. |
| 6. Remove a switch electrical wiring from a support bracket on the transmission. |
| 7. Unscrew a nut of fastening of the lever and remove the selector lever from a switch shaft. |
| 8. Unscrew the switch and remove it from a transmission case. |
