Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
- 8. Transmissions
   + 8.1. Mechanical transmission
   - 8.2. Automatic transmission
      8.2.1. Technical data
      8.2.2. Replacement of oil in the transmission
      8.2.3. Removal and installation of a cable of the selector
      8.2.4. Removal and installation of the drive of a speedometer
      8.2.5. Removal and installation of a cooler
      8.2.6. Removal and installation of the multipurpose switch
      8.2.7. Removal and installation of the electronic control device (ECU)
      8.2.8. Removal and installation of the automatic transmission
      8.2.9. Capital repairs of the automatic transmission
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions





8.2.1. Technical data

GENERAL INFORMATION

Type
automatic, 4 forward transfers and 1 back
Designation
4 HP 20
Oil volume in the transmission:
  – when replacing oil
3,0 liters
  – the general capacity, including the hydrotransformer
8,3 liters

Moments of tightening, N · m

Bolts of fastening of a cooler
40
Bolts of fastening of the multipurpose switch
10
Selector lever
21
Left suspension bracket of the power unit:
  – suspension bracket rack
50
  – central nut
65
Bolts of fastening of the transmission to the engine
60
Bolts of fastening of the case of the intermediate bearing
50
Bolts of fastening of the lower frame
85
Bolts of fastening of a plate of the hydrotransformer
30
Bolts of fastening of wheels
90