Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
- 13. Electric equipment
13.1. Technical data
13.2. Detection of not closed chain
13.3. Safety locks and relay
13.4. Switches
13.5. Bulbs of external lighting
13.6. Lighting lamps of salon
13.7. Devices of external lighting
13.8. Adjustment of light of headlights
13.9. Combination of devices
13:10. Multipurpose display
13:11. Lighter
13:12. Hours
13:13. Sound signal
13:14. Screen wiper lever
13:15. Engine of a screen wiper and draft
13:16. Back screen wiper
13:17. Windscreen washer
13:18. Automobile radio tape recorder
13:19. Column (dynamics)
13:20. Antenna
13:21. Control system cruise control
13:22. Anticreeping system and immobilizer of the engine
13:23. Electric units of forward sitting
13:24. Safety cushion
13:25. Safety cushion elements
+ 13:26. Electric circuits
+ 14. Main malfunctions
|
Replacement
Prevention
Before replacement of bulbs of external lighting check the corresponding electric chain and a safety lock.
Do not touch a glass flask of a lamp by hands. The fingerprint evaporates and besieged on a reflector therefore lighting worsens. Surely replace the failed lamps with lamps of the same type. Wipe the spots arising on imprudence from a touch with a pure lint-free rag or alcohol.
HEADLIGHT
| PERFORMANCE ORDER |
|
|
1. Release brackets of fastening and uncover a back part of a headlight. |
| |
2. Remove the electric socket from a back part of the glow lamp of a headlight. |
| 3. Squeeze spring brackets of fastening of a bulb and cast away them aside. Take a bulb from a headlight. |
| 4. Establish a new bulb so that ledges on the boss of a bulb were combined with headlight grooves, and fix a bulb by spring brackets. |
| 5. Connect the electric socket and establish a back cover of a headlight. |
|
FORWARD MARKER LIGHT
| PERFORMANCE ORDER |
| 1. Release a bracket of fastening and remove a back cover from a headlight. |
| 2. Turn a cartridge of a dimensional lamp and take it from a headlight. Take a bulb from the boss, having pulled it on themselves. |
| 3. Installation is made in the sequence, the return to removal. |
|
FOG LIGHTS
| PERFORMANCE ORDER |
| 1. Lift a forward part of the car and record on supports. |
|
|
2. Unscrew screws (are specified by shooters) and remove the plastic mudguard located under a fog light. |
|
|
| 3. Disconnect the electric socket (a photo at the left), release a bracket of fastening and remove a fog light (a photo on the right). |
|
4. Disconnect a spring clip (it is specified by an arrow) and take a reflector from the headlight case. |
|
|
| 5. Disconnect the electric socket (it is specified by an arrow a photo at the left), squeeze a spring of fastening of a bulb and take a bulb from a headlight (a photo on the right). |
| 6. Establish a new bulb so that ledges on the boss of a bulb were combined with headlight grooves, and fix by a spring bracket. |
| 7. Connect the electric socket and a spring bracket of fastening of a reflector in a headlight. |
| 8. Establish a headlight into place and fix by a fastening bracket. |
| 9. Connect the electric socket and establish into place plastic mudguards under a headlight. |
|
FORWARD INDEX OF TURN
| PERFORMANCE ORDER |
| 1. For improvement of access to the forward left index of turn remove a protective cover from the accumulator. |
|
|
2. Turn a cartridge of a bulb of the forward index of turn counterclockwise and take it from a back part of the index of turn. For extraction of the glow lamp from the boss press it and in this situation turn on or counterclockwise. |
| 3. Installation is made in the sequence, the return to removal. |
|
SIDE REPEATER OF TURN
| PERFORMANCE ORDER |
|
|
1. By means of the screw-driver take the side repeater of turn from a car wing. |
| |
2. Turn a cartridge with a bulb counterclockwise and take it. For extraction of a bulb from the boss pull it on yourself. |
| 3. Installation is made in the sequence, the return to removal. |
|
BULBS OF THE BACK LAMP
| PERFORMANCE ORDER |
|
|
1. In a back part of the luggage compartment unscrew screws and remove back finishing of a luggage carrier. Take percussion caps and remove a back upholstery of a luggage carrier. |
|
|
| 2. On some models for access to the left back lamp unscrew a connector (it is specified by an arrow a photo at the left), remove office of storage and turn off the left side finishing of a luggage carrier aside (a photo on the right). |
|
3. Release clamps and take a cartridge with a bulb from a back lamp. |
|
4. For extraction of a bulb from the boss press it and in this situation turn counterclockwise. |
| 5. Installation is made in the sequence, the return to removal. |
|
BULBS OF THE BACK LAMP ON THE KOMBI (ESTATE) MODELS
| PERFORMANCE ORDER |
| 1. Remove a back lamp. |
|
2. Release clamps and remove the holder of bulbs from a back lamp. |
| |
3. For extraction of a bulb from the holder of a back lamp press it and in this situation turn counterclockwise. |
| 4. Installation is made in the sequence, the return to removal. |
|
BULB OF ILLUMINATION OF REGISTRATION PLATE ON MODELS THE SEDAN (SALOON)
| PERFORMANCE ORDER |
|
|
1. Release a bracket of fastening and remove a plafond from a lamp of illumination of registration plate. |
| |
2. Take a bulb from the holder, having pulled it on themselves. |
| 3. Installation is made in the sequence, the return to removal. |
|
BULB OF ILLUMINATION OF REGISTRATION PLATE ON THE KOMBI (ESTATE) MODELS
| PERFORMANCE ORDER |
|
|
1. Unscrew the screw and remove a plafond of a lamp of illumination of registration plate. |
| |
2. Remove a bulb, having pulled it on themselves. |
| 3. Installation is made in the sequence, the return to removal. |
|
|
|
