| 1. Remove the negative plug from the accumulator, wait 2 minutes and remove the central console. Remove the electric socket from the control unit of a security system. |
| Safety cushion from the driver |
| 2. Unscrew 2 screws of fastening of a safety cushion located from a back part of a steering wheel. For access to screws turn a steering wheel. |
|
|
3. Establish a steering wheel for the movement directly forward and remove from it a safety cushion. Disconnect the electric socket from a back part of a safety cushion. |
|
4. For installation connect the electric socket to a safety cushion, establish a pillow in the center of a steering wheel and fix by screws, having tightened them the required moment. At the same time first of all screw in the left screw of fastening. |
| 5. Connect the electric socket to the control unit of a safety cushion and install the central console. |
| 6. Check that in interior of the car there is nobody, and connect the accumulator. Through an open door turn a key in the lock of ignition and check action of a security system for fire of a control lamp. |
| Safety cushion from the passenger |
| 7. Remove the dashboard. |
|
8. Unscrew nuts (are specified by shooters) fastenings of a safety cushion and take it from the dashboard. |
| 9. Install a safety cushion in the dashboard and fix by nuts. |
| 10. Install the dashboard and connect the accumulator. |
| Control unit of a safety cushion |
|
11. Unscrew nuts (are specified by shooters) fastenings and take the control unit of a safety cushion from the car. |
| 12. Install the safety cushion control unit so that the arrow in the top part of the block showed on a forward part of the car. Fix the block by nuts, having tightened from the required moment. |
| 13. Connect the electric socket to the block and install the central console. |
| 14. Check that in interior of the car there is nobody, and connect the accumulator. Through an open door include ignition and check a security system on inclusion of a control lamp of a safety cushion. |
| Wire of inclusion of a safety cushion |
| 15. Remove a safety cushion from the driver and remove a steering wheel. Establish forward wheels for the movement directly forward. |
|
16. Unscrew screws of fastening of the lower casing of a steering column and remove its top and lower casings. |
|
17. Switch-off the electric socket of system a cruise control or the autoradio tape recorder switch. |
|
18. Track a wire from contact of a safety cushion down and disconnect the electric socket located on a wire. |
|
|
| 19. Unscrew screws (are specified by shooters a photo at the left) and remove contact from the top part of a steering column (a photo on the right). |
|
20. Before installation check that the contact of a safety cushion is come according to tags (are specified by shooters) on the top part of contact and that forward wheels are established for the movement directly forward. |
| 21. Come into contact of a safety cushion, check correctness of an arrangement of an electrical wiring and fix contact by screws. |
| 22. Connect the electric socket of the wire going to contact of a safety cushion. |
| 23. Connect the electric socket of system a cruise control or turning on of the autoradio tape recorder and establish casings on a steering column. |
| 24. Establish a steering wheel and a safety cushion. |
