Peugeot 406

since 1996 release

Repair and operation of the car


Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
- 6. System of ignition
   - 6.1. Systems of start and charging
      6.1.1. Accumulator
      6.1.2. System of charging
      6.1.3. Generator of alternating current
      6.1.4. System of start of the engine
      6.1.5. Starter
      6.1.6. Oil pressure sensor
      6.1.7. Oil level sensor
   + 6.2. System of ignition (petrol engines)
   + 6.3. System of prestarting heating (diesel engines)
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions





6.1.5. Starter

Removal

PERFORMANCE ORDER
1. Disconnect the negative plug of the accumulator.
2. Lift a forward part of the car and record on supports. In need of improvement of access remove the air filter and system of pipes.
3. Unscrew two nuts (are specified by shooters) and remove wires from the traction relay of a starter. Switch-off the electric socket of management of the traction relay.
4. Unscrew three bolts, supporting a starter (the arrow specified the grounding tire on one of bolts).
5. Take a starter from the lower part of the engine.

Installation

Installation is made in the sequence, the return to removal.