Peugeot 406

since 1996 release

Repair and operation of the car


Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
- 6. System of ignition
   - 6.1. Systems of start and charging
      6.1.1. Accumulator
      6.1.2. System of charging
      6.1.3. Generator of alternating current
      6.1.4. System of start of the engine
      6.1.5. Starter
      6.1.6. Oil pressure sensor
      6.1.7. Oil level sensor
   + 6.2. System of ignition (petrol engines)
   + 6.3. System of prestarting heating (diesel engines)
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions




2438a55b

6.1.3. Generator of alternating current

Removal

PERFORMANCE ORDER
1. Disconnect the negative plug of the accumulator.
2. Take off an auxiliary driving belt.
3. Remove the rubber covers closing generator plugs, then unscrew nuts and remove wires from the generator.
4. On the 2.1 liters diesel engines unscrew a bolt of fastening of the pump of the amplifier of steering and move the pump without detachment from it hydraulic hoses aside.
5. Unscrew the top suspension bracket of the generator. Unscrew the lower coupling bolt of the generator.
6. Take the generator from a motor compartment.

Installation

Installation is made in the sequence, the return to removal.