Смотрите http://www.elektronik-russia.ru ближайший сервисный центр +по ремонту телефонов.

Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
- 2. Maintenance
   - 2.1. Petrol models
      2.1.1. Technical data
      2.1.2. Frequency of service
      - 2.1.3. Maintenance
         - 2.1.3.1. Each 15000 km or 12 months
            2.1.3.1.1. Replacement of oil and oil filter
            2.1.3.1.2. Check of level of oil in the automatic transmission
            2.1.3.1.3. Check of tightness of hoses and effluence of liquids
            2.1.3.1.4. Replacement of the filter thin air sedums in system of ventilation
            2.1.3.1.5. Coupling work check
            2.1.3.1.6. Check of a protective cover of a power shaft
            2.1.3.1.7. Steering and suspension bracket
            2.1.3.1.8. Check of the shock-absorber
         + 2.1.3.2. Each 30 000 km
         + 2.1.3.3. Each 60000 km
         + 2.1.3.4. Each 120000 km or alternate years
   + 2.2. Diesel models
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions





2.1.3.1.2. Check of level of oil in the automatic transmission

PERFORMANCE ORDER
1. Carry out a short trip on the car to heat transmission to normal temperature. Then stop the car on a plain horizontal surface. Level of oil is checked by the probe placed on the forward party of a motor compartment just before connection of the engine with the transmission. The top of the probe has bright coloring.
2. Idling the engine at the tightened hand and foot brake move the selector handle on all positions and return to situation Park. In this position of the selector check oil level. It has to be between lower and top (b) marks.
3. If oil level low, then add it through an opening for the probe. Note. Never assume that the level of oil was more top mark.
4. Then make a trial trip and double-check level.
5. Always support oil level between two marks of the probe. Shortage of oil can lead to serious breakages of the transmission.
6. If there is a need to often add oil then leak which needs to be found and eliminated until it did not lead to serious consequences takes place.