Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
- 10. Brake system
   10.1. Technical data
   10.2. Pumping of the hydraulic brake system
   10.3. Brake pipelines and hoses
   10.4. Replacement of front brake shoes
   10.5. Replacement of back brake shoes
   10.6. Replacement of back brake shoes on drum brakes
   10.7. Forward brake disk
   10.8. Back brake disk
   10.9. Back brake drum
   10:10. Support of a forward brake
   10:11. Support of a back wheel
   10:12. Back brake cylinder
   10:13. Main brake cylinder
   10:14. Brake pedal
   10:15. Vacuum amplifier of brakes
   10:16. Unilateral valve of the vacuum amplifier of brakes
   10:17. Adjustment of the emergency brake
   10:18. Lever of the emergency brake
   10:19. Cable of the emergency brake
   10:20. Brake shoes of the emergency brake (model with disk brakes)
   10:21. The valve of adjustment of pressure in the brake system
   10:22. Stoplight switch
   10:23. Anti-blocking system of brakes (ABS)
   10:24. The vacuum pump (cars with the diesel engine)
   10:25. Check of the vacuum pump on cars with diesel engines
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions




2438a55b

10.1. Technical data

GENERAL INFORMATION

Forward brakes
Type
Disk brakes with a support with one piston
Diameter of a disk:
  – liter engines 1.6 and 1.8
260 mm
  – other models
283 mm
Thickness of a brake disk:
  – petrol engines 1.6 and 1.8 of liter:
     • new
24,0 mm
     • minimum thickness
22,0 mm
  – other models:
     • new
26,0 mm
     • minimum thickness
24,0 mm
Maximum beating of a disk
0,05 mm
Thickness of an overlay of a brake shoe:
  – new
13,0 mm
  – minimum
2,0 mm
Back brakes with the brake drum
Internal diameter of a drum:  
  – new
228,6 mm
  – the maximum diameter of a drum after a repoint
230,0 mm
Thickness of an overlay of a brake shoe:
  – new
4,8 mm
  – minimum
1,5 mm
Maximum beating of a drum
0,07 mm
Back disk brakes
Diameter of a brake disk
290 mm
Disk thickness:
  – new
10,0 mm
  – minimum thickness
8,0 mm
Maximum beating of a disk
0,05 mm
Thickness of an overlay of a brake shoe:
  – new
11,0 mm
  – minimum
2,0 mm

Moments of tightening, N · m

ABS system knots:
  – bolts of fastening of the electronic control device (ECU)
5
  – fastening of the regulator
20
  – the ABS sensor installed on a car wheel *
10
  – nut of fastening of an axis of the hinge of a brake pedal
40
  – screw of fastening of a brake disk
10
Forward brake support:
  – a bolt of fastening of the directing pin *
30
  – bolts of fastening of a suspension bracket *
120
  – lever of the emergency brake
20
  – nuts of fastening of a brake hose
15
  – bolts of fastening of the regulator of pressure *
20
  – nuts of fastening of the main brake cylinder
15
Back brake support:
  – assembly bolt *
50
  – a bolt of fastening of the directing pin *
30
  – bolts of fastening of the brake cylinder
10
  – bolts of fastening of a wheel
90
  – nuts of fastening of the vacuum amplifier of brakes
20

* At screwing up of threaded connections apply structure of blocking of a carving from unscrewing.