Peugeot 406

since 1996 release

Repair and operation of the car

Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
- 7. Coupling
   7.1. Technical data
   7.2. Coupling cable
   7.3. Coupling pedal
   7.4. Hydraulic control system of coupling
   7.5. Leading knot of coupling
   7.6. Coupling switching off mechanism
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions

7.3. Coupling pedal

Removal

PERFORMANCE ORDER

1. Disconnect the negative plug of the accumulator.

2. In interior of the car open a cover of an immobilizer and turn on 90 ° a clamp of a cover of a box with fuses. Disconnect the electric socket from a block, unscrew screws of fastening and remove the lower panel from the driver.

3. On engines with the hummock drive of switching off of coupling remove a coupling cable from a pedal.

4. On models with the hydraulic drive of switching off of coupling remove the spherical hinge of a pusher of the main cylinder from a pedal.

5. Unscrew a bolt and a nut and remove a coupling pedal.

Installation

PERFORMANCE ORDER

1. Grease points of turn of a pedal of coupling.

2. Insert a pedal into place and fix it by a bolt and a nut.

3. Connect a cable of coupling or a pusher of the main cylinder to a pedal.

4. Several times press a coupling pedal.

5. Establish earlier removed elements in the lower part of the panel and connect the accumulator.