Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
- 6. System of ignition
+ 6.1. Systems of start and charging
- 6.2. System of ignition (petrol engines)
6.2.1. Check of system of ignition
6.2.2. Ignition coil
6.2.3. Installation of a corner of an advancing of ignition
+ 6.3. System of prestarting heating (diesel engines)
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions
|
Removal
1.6 LITRES ENGINES
| PERFORMANCE ORDER |
| 1. Disconnect the negative plug of the accumulator. The coil of ignition is installed on the left forward end of a head of the block of cylinders. |
| |
2. Release a clamp and remove the socket from the ignition coil. |
| 3. Mark high-voltage wires and disconnect them from the ignition coil. |
| 4. Unscrew 4 screws of fastening and remove the ignition coil. |
|
1.8 AND 2.0 LITRES ENGINES
| PERFORMANCE ORDER |
| 1. Disconnect the negative plug of the accumulator. On the engine 4 separate coils of ignition everyone on the top part of a spark plug are installed. |
| 2. For access to coils of ignition switch-off sockets in the left end of the block of ignition, then unscrew 6 bolts of fastening and remove the ignition block from spark plugs up. Separate coils of ignition can be removed from the ignition block if necessary. |
|
Installation
Installation is made in the sequence, the return to removal.
|
|
