Peugeot 406

since 1996 release

Repair and operation of the car

Peugeot 406
+ 1. Maintenance instruction
- 2. Maintenance
   + 2.1. Petrol models
   - 2.2. Diesel models
      2.2.1. Technical data
      2.2.2. Frequency of service
      - 2.2.3. Maintenance
         + 2.2.3.1. Each 10000 km or 12 months
         2.2.3.2. Each 20 000 km
         2.2.3.3. Each 30 000 km
         + 2.2.3.4. Each 60 000 km
         2.2.3.5. Each 120 000 km or 2 years
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions

2.2.3. Maintenance

GENERAL INFORMATION

Motor compartment of the engine 2.1 liters (top view)

1. Maslozalivny mouth
2. Fuel filter
3. Accumulator
4. Tank of brake fluid
5. Radiator
6. Broad tank
7. Suspension bracket rack
8. Air filter

9. Pump of the amplifier of steering
10. Fuel pump
11. Generator
12. Tank of liquid of the amplifier of steering
13. Windscreen washer tank
14. Box of the relay and safety locks
15. ABS
16. Toplivopodkachivayushchy pump

Motor compartment of the engine 2.1 liters (bottom view)

1. Masloslivny stopper
2. Conditioner compressor
3. Intermediate bearing of a power shaft
4. Brake support

5. Lower lever of a forward suspension bracket
6. Steering draft
7. Stabilizer of cross stability of a forward suspension bracket

Back part of the car (bottom view)

1. Fuel tank
2. Longitudinal lever of a back suspension bracket
3. Cable of the emergency brake

4. Brake support
5. Lower lever of a back suspension bracket
6. Lever of a back suspension bracket

This subsection is intended to provide correctness of carrying out maintenance of the car, to help to support the car in proper condition and to prolong its service life.

If servicing was not carried out regularly, then bad operation of the engine (incomplete return of power, strange behavior of the engine, etc.) can turn out to be consequence of it. In that case it is necessary to carry out the following actions:

Primary actions

Clear, examine and check the accumulator.

Check all liquids connected with the engine.

Check a state and a tension of an auxiliary driving belt.

Check a condition of the air filter, and if necessary replace.

Replace the fuel filter.

Check a condition of all hoses, branch pipes and their tightness.

If these actions were not effective, then perform the following operations:

Secondary actions

Check system of charging.

Check fuel system.