Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
- 8. Transmissions
   + 8.1. Mechanical transmission
   - 8.2. Automatic transmission
      8.2.1. Technical data
      8.2.2. Replacement of oil in the transmission
      8.2.3. Removal and installation of a cable of the selector
      8.2.4. Removal and installation of the drive of a speedometer
      8.2.5. Removal and installation of a cooler
      8.2.6. Removal and installation of the multipurpose switch
      8.2.7. Removal and installation of the electronic control device (ECU)
      8.2.8. Removal and installation of the automatic transmission
      8.2.9. Capital repairs of the automatic transmission
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions





8.2.4. Removal and installation of the drive of a speedometer

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and record on supports. Remove a mudguard from under the engine. The drive of a speedometer is located in a back part of a case of the transmission near the internal end of the right power shaft.
2. Remove the socket from a speedometer drive casing.
3. Unscrew a fastening bolt, remove the thermofilter and take the speedometer drive from a transmission case together with ring consolidation.
4. If necessary it is possible to take a gear wheel of the drive of a speedometer and a sealing ring from a casing.

Installation

Installation is made in the sequence, the return to removal.