Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engine
   + 3.1. Petrol engines
   - 3.2. Diesel engines
      3.2.1. Technical data
      3.2.2. Check of pressure of compression
      3.2.3. Installation of the mechanism of gas distribution
      3.2.4. Cover of a head of the block of cylinders
      3.2.5. Pulley of a bent shaft
      3.2.6. Casing of a gear belt
      3.2.7. Gear belt
      + 3.2.8. Pulleys of a gear belt
      + 3.2.9. Right engine mount and mechanism of a tension of a gear belt
      3.2.10. The directing roller of a gear belt
      3.2.11. Cam-shaft and pushers
      3.2.12. Check and adjustment of gaps of valves
      + 3.2.13. Removal and installation of a head of the block of cylinders (engines 1.9 liters)
      3.2.14. Removal and installation of the oil pallet
      3.2.15. Removal and installation of the oil pump
      - 3.2.16. Replacement of sealing rings of the crankshaft
         3.2.16.1. Right sealing ring of the crankshaft
         3.2.16.2. Left sealing ring of the crankshaft
         3.2.16.3. Right sealing ring of a cam-shaft
         3.2.16.4. Left sealing ring of a cam-shaft
   + 3.3. Repair of the engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions




Какой вред от Электронных сигарет.
Офтальмологические операционные микроскопы оФТАЛЬМОМЕТРЫ Трейдомед Инвест.




3.2.16. Replacement of sealing rings of the crankshaft

3.2.16.1. Right sealing ring of the crankshaft

PERFORMANCE ORDER
1. Remove a crankshaft pulley.
2. Measure depth of installation of a sealing ring.
3. Take a sealing ring, using the special tool. Alternatively drill two small openings in an end face of a sealing ring, screw in two self-cutting screws and flat-nose pliers, for heads of screws, extend a sealing ring from a nest.
4. Clear a nest of a sealing ring and the condensed surface of the crankshaft.
5. Dip a new sealing ring into pure engine oil and establish it in a nest on previously measured depth, using the corresponding mandrel.
6. Establish a crankshaft pulley.